Artwork Drafting Film
Packs of ten sheets of matt .003" polyester drafting film which will stand
up to constant handling.
Video TutorialHow to produce perfect laser and inkjet artwork. |
 |
LaserStar
A
specially formulated translucent film for the production of high resolution
PCB artworks directly from any Laser printer. LaserStar has a 75 micron base
with a special coating for high resolution keying and fixing of toner enabling
crisp dense artworks to be produced. The film will also accept copier toner
enabling usable artworks to be produced from pre-printed originals.
JetStar Standard - Inkjet Film for artwork production
A specially formulated, inkjet film for the production of artwork photo
tools for graphics and PCB production. The coating on the film allows
dense image to be produced without the ink bleeding. The film is designed
for use with ink jet printers using dye-based ink. Pigments based inks,
used for long lasting digital photograph prints, are not suitable for
JetStar. Available in A4 size in 10 or 100 sheet packs.
Please ensure your printer will print on clear film before purchasing Jetstar of Jetstar Premium
JetStar
Premium - |
Featuring a superior coating to JetStar Standard this inkjet film should be
used for the ultimate quality artwork production for graphics and PCB production.
The extra fast drying coating on the film allows extremely dense, high resolution
images to be printed. This film is designed for use with ink jet printers using
either dye-based or modern pigment based inks. Available in A4 size in 10 or
100 sheet packs.
Please ensure your printer will print on clear film before purchasing Jetstar of Jetstar Premium
UV Filter Film
Polyester film coated with a yellow ultra violet light filter. Suitable for
masking windows etc.
Supplied in full rolls - 10 metres x 59" wide or by the running metre.
Negative Film
Orange Dry Peel Negative Film
A UV opaque orange artwork reversal film. After exposure the film is applied to the adhesive peeling board which must be purchased separately. The board has a low tack adhesive on the surface which aids separation during the peeling process. The top layer of the film which is peeled away will be an exact reversal of the original artwork. The orange emulsion is UV opaque.
