Dip Coating Machine

COATING MACHINES

RDC 15 & 21 Dip Coating Machines

The RDC 15 and 21 are machines designed for laboratory dip coating of modern liquid photoresists. Today a more and more popular application is the so called: "sol-gel-application". This machine was developed to meet the demand of a greater variety of speeds, iterations, dipping and drip off times and heavier workpieces.

  RDC 15 Features
Stroke length: 120 - 605 mm
  • lift bar for several workpiece fittings. The dipping height and the sizes of the aluminium profiles can be easily adapted to even dip coat bulky items.
  • The insertion and the drawing or coating speed is separately adjustable from 30 mm/min until 7200 mm/min.
  • The dipping time as well as the drip-off-time (pause time up and down) is separately adjustable from 1 s up to 99h : 59min : 59s. This enables the machine not only to coat but to precisely develop. This is of great importance with certain photo coatings of the miniature etching technology.
  • Up to 8 iterations are possible.
  • The working range of the lift bar can be adjusted via the control panel. The maximum size of the workpiece is therefore only limited by the maximum lift range of the machine and the size of your cuvette.
  • On request we manufacture Dip Coaters according to your needs. Especially the dipping height and the sizes of the aluminium profiles are easily changed.
Maximum load: 1.5 kg
Weight: 12 kg
Dimensions:
(W x L x H):
 21 x 41 x 112cm
Insertion speed: Programmable from 30mm/min - 7200mm/min
Drawing speed: Programmable from 30mm/min - 7200mm/min
Dipping time: 0.5s - 100h
Drip off time: 0.5s - 100h
Power supply: 100 - 240 V, 50 - 60 Hz, 1.6 A
Iterations: Upto 8 times
  RDC 21 Features
Stroke length: 120 - 605 mm
  • programmable insertion speed
  • programmable drawing speed
  • programmable dipping time
  • programmable drip off time
  • up to 8 iterations are possible.
  • programmable working range of the lift bar your set parameters remain stored even after switching off machine

Additional options:

  • On request we manufacture Dip Coaters according to your needs.
  • Especially the dipping height and the sizes of the aluminium profiles are easily changed.
Maximum load: 5 kg (reduced max. speed with maximum load)
Weight: 14 kg
Dimensions:
(W x L x H):
 28 x 47 x 105cm
Insertion speed: Programmable from 8mm/min - 7200mm/min
Drawing speed: Programmable from 8mm/min - 7200mm/min
Dipping time: 0.5s - 100h
Drip off time: 0.5s - 100h
Power supply: 100 - 240 V, 50 - 60 Hz, 3.0 A

Advantages of the RDC21 compared to RDC15:

  • Adjustable step resolution for vibration free driving behaviour
  • Stronger Stepper motor enables a 4-times higher load (5kg instead of 1,5 kg)
  • At customer's choice we offer a 1:2 gear reduction for higher speeds instead of the general 1:5 reduction.
Speed Steps related to mm/min
Steps
mm/min
00
75
10
312.5
20
787.5
30
1162.5
40
1525
50
1900
60
2375
70
3275
80
4400
90
10575
99
18000

Order Code Description   1+ Qty:
35-1715 RDC 15 Dip Coating Machine £2595.00
35-1716 RDC 21 Dip Coating Machine £3795.00