The name IONEX stands for IONEXchanger, which is the very heart of this modern wastewater treatment system. In total it consists of a two-stage filtration, two ion exchange and one PH-levelling units.
IONEX is ideally suited for all wastewater cleaning processes in modern PCB prototype laboratories. The units exist in four variants with different sump capacities and ion exchange capacities. A separate spray pump/reservoir module is included with the closed loop K systems, (not shown on dimensions opposite). This consists of a secondary reservoir and pump to enable the treated water to be introduced at pressure to the water inlet of the spray wash system being used.
- Removal of solids and all heavy metals
- Decrease of chemical oxygen demand
- Easy handling and operation
- IONEX A and B perform additional PH neutralization and discharge to the drain
- IONEX K types offer additional Kation capture for full rinse water recycling
- Polyethylene filter candle, 10 µm
- Lower and upper sump level control switch
- Storage sump for 110 (IONEX A) or 220 litres (IONEX B) of waste water
|
IONEX A (KA)
|
IONEX B (KB)
|
|
| Size (H x D x L): |
1400 x 425 x 600mm
|
1400 x 850 x 600mm
|
| Weight: |
30 kg
|
60 kg
|
| Tank capacity: |
110 l
|
220 l
|
| Cleaning capacity: |
10 l/hour
|
20 l/hour
|
| Power supply: |
230V~, 50Hz, 50W
|
230V~, 50Hz, 100W
|
| Type | Kation Resin Litre | Anion Resin Litre | Mineral Granules (kg) |
| Ionex A | 3 | - | 5.75 |
| Ionex B | 6 | - | 7.48 |
| Ionex KA | 3 | 6 | - |
| Ionex KB | 6 | 12 | - |
