PCB PRODUCTION LINES
- Complete 7 Tank Processing Lines
- 10" x 12" or 12" x 18" board capacity
- Processed and tinned PCBs in under 20 minutes
- Easy emptying of tanks from bottom drain, no syphoning
- RCD current trip socket fitted as standard
Develop - Spray Wash - Etch - Spray Wash - Resist Strip - Spray Wash - Immerse Tin
These
two units are very similar to the PCB Labstations but they include an extra
spray wash and process tank instead of the sink. This enables the complete processing
sequence to be undertaken in one compact free standing unit measuring only 835mm
(width) x 578mm (depth) x 900mm (height). These units are ideal for producing
prototype or low volume production quantities of conventional boards, quickly,
safely and efficiently.
Each tank is moulded from polypropylene. The 10" x 12" tanks from a single injection
moulding and the larger 12" x 18" from two injection moulded tanks welded together
and reinforced. All tanks have bottom drains so no syphoning is needed when
the tanks are emptied.
The cabinet itself is of a steel construction clad with polypropylene sheeting
and incorporates a lockable storage facility. Doors are manufactured from 6mm
thick black PVC.
A chemical starter kit is available which offers a saving on chemicals purchased
separately. Order 2 kits for a 12"x18" unit.
Complete
7 Tank Processing Lines with sink
The logical progression to a standard 7 Tank Processing Line is to produce
a version with a built in sink. The facility of a sink with a hot and cold water
mixer tap helps keep the whole process of PCB production even more clean and
efficient. All other features on these units with the sink are common to the
PB710 and PB720.
Overall dimensions are: width 1185mm, depth 580mm, and height 900mm.
