DM 9018 18" Shear
The 18" "Raptor" Shear is both powerful and rigid. It can be used on any bench or mounted using the four corner fixing points. Designed and manufactured in the UK the Shear which has the ability to accurately cut PCB laminates, Plastics up to 2.00mm thick and Aluminium up to 1.5mm along the whole cutting length of 18" (457mm). The bottom blade is reversible providing two cutting edges. An important feature of this shears is safety. Free access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade. These guards are split allowing easy alignment of materials. A safety latch is fitted to the pivot to prevent operation without it first being released. A 12" (305mm) wide cutting bed is fitted although wide material can also be cut. For positional accuracy the bed is fitted with a metric and imperial scale to aid accurate cutting.
Footprint size : 360 x 570mm.
When fully extended height of handle is : 700mm.
Weight : 14KG
A powerful, cost effective, shear which has the ability to accurately cut PCB laminates, plastics up to 2.00mm thick and aluminium up to 1.5mm. An important feature of this shears is safety. Free access to the cutting area is prevented by heavy Perspex shielding extending along both sides of the blade. A safety latch is fitted to the pivot to prevent operation without it first being released. For positional accuracy the cutting bed is fitted with a rule which is recessed to assist in securing the PCB or sheeting whilst cutting is in progress.
The DM9001 will cut materials up to 305mm (12") and has a height of 670mm and a footprint of 440 x 245mm. It has a cutting bed of 225mm wide from the blade although wider material can be cut.
18" and 25" Shears
Two bench top shears suitable for cutting printed circuit board laminates, thin metal sheet and aluminium (1.5/2.0mm) or plastic labels / front panel materials. On lowering the operating handle, a spring loaded clamp is activated which holds the material securely during cutting, thus enabling cuts to be made with a mini-mum of effort. These shears are composed of an epoxy powder coated cast aluminium frame fitted with hardened and ground steel blades. The Model 45 has a clear acrylic front safety guard to protect the operator, whilst at the same time making it possible to see the blades so that the material to be cut can be aligned accurately. The Model 45 (illustrated) has an 18" cutting capacity and the DM525 25". Both have imperial and metric edge scales.
Model 45 18” Shear
DM 525 25” Shear
Spare Blades for 18" Shear
Spare Blades for 25" DM525 Shear
ES420 Corner Rounder
An inexpensive invaluable tool to meet the demand for a quick corner rounding facility for plastic/metal labels and front panels. The table is effectively split into two halves, each containing 90 degree stops, in the angle of each is a hardened radius of 6mm on one side and 4mm on the other. The punch has been ground to simultaneously marry both of these rounds when driven down by the cam actioned handle. The material to be rounded is slid from the left or right hand side positively into the stops, to leave an overhang which is sheared through by the punch to leave a clean corner of either 6mm or 4mm radius depending on which side of the table you use. It should be noted that material originally cut out of square will result in an unbalanced round being removed. The table support column is mounted on a 5" X 5" steel plate with screw holes for bench fixing, although this will probably be unnecessary for most users. Overall height with handle upright 8" (205mm) and weight 1.2Kg.